
Add to Cart
The solar & wind hybrid street light based on the principle of mutual complementation between the renewable energies of the wind- power and the solar uses the solar and the wind as the power source of the street light, which not only has all the advantages of the solar street lights, but also overcomes their disadvantage of no power generated during rainy days. As it is raining, there is often high wind, which is suitable to be used for power generation.
The solar & wind hybrid LED street light are used widely in various fields, beautiful in shape and a combination of application and art for both street lights and a landscape.
The solar & wind hybrid LED street light are applicable in areas where is rich in wind resources with the annual average wind speed higher than 3m/s.
Height: 5-10M, hot galvanized pole, surface spray treatment
System voltage: DC12V/24V
Suitable light source: high power LED
Working each day: 4-12h (may design it into a full power illumination mode or an energy-saving mode as required by the customer)
Number of overcast and rainy days: 2-7 days (may design it as required)
Total luminous flux: 3000lm-6000lm
Luminous: >=100lm
Illuminance: 10Lux-45Lux (may design it as required)
Wind Resistance: 41.4m/s
Service temperature: -40℃---+60℃
Cell Panels: Mono/polycrystalline silicon solar cell panels with high conversion efficiency, life expectancy>=25 years
Storage battery: valve-controlled and sealed maintenance-free gel, storage batteries, for solar energy only, life expectancy 5-7 years.
Controller: microcomputer intelligent waterproof controller such many functions as anti-overcharge, anti-over discharge, light control and time control, life expectancy>=5 years
Box: mold-pressing forming, fully sealed waterproof, good insulation effect, life expectancy>=20 years
Light source life: >=50000h
Wind power generator: permanent magnet motor, low start-up wind speed wind & solar hybrid wind power generator, life expectancy>=15 years
The configuration said above is for reference only and the actual configuration is designed according to the local climate conditions and the customers' requirements.